Contact us : [email protected]
Contact us : [email protected]
Tank Clean nozzle
Industrial Spray Nozzles
Industrial Spray Nozzles
  • Company Profile
  • Technology Content
  • A Common Nozzle
    • A Series Hollow Cone Spray Nozzle
      • ——Corner Nozzle Model
      • ——Mid-High Flow Rate Foundry Nozzle
      • ——large flow carbide silicone spray nozzle
      • ——beeline type hollow cone-shaped spray nozzle
      • ——AF Series Hollow Cone Spray Nozzle
    • BB Series Full Cone Spray Nozzle
      • ——standard angle
      • ——wide angle
      • ——square standard angle
      • ——square wide angle nozzle
      • ——narrow angle nozzles(15°/130°)
    • CC Series Flat Fan Nozzle
      • ——standard angle
      • ——V Common Narrow Spray Nozzle
      • ——Wide-angle Spray Nozzle
  • B assembled Nozzle
    • SJV Three-piece Full Cone Or Flat Fan Spray Nozzle
      • ——Hollow Cone
      • ——Solid cone
      • ——Flat Fan
      • ——Wide angle
  • C Quick Dismantling Nozzle
    • QJJ Series Quick Dismantling Nozzle
      • ——Hollow Cone
      • ——Full Cone
      • ——Flat Fan
      • ——Narrow Nozzle
  • D Air Atomizing Nozzle
    • D Series Air Atomizing Nozzle
      • ——Pressure Air Atomizing series
      • ——Siphon Gravity-Fed Air Atomizing Nozzle Series
      • ——Flat Pressure Air Atomizing
    • DJ Automatic Air Atomizing Nozzle
    • DK Automatic Fine Misting Nozzle(colophony nozzle)
    • DE Large flow Air Atomizing Nozzle
    • ADG Ultrasonic Atomizing Nozzle
  • E series Spiral Nozzle
    • Hollow Cone, Full Cone Spiral Nozzle
    • Flanged Silicone Carbide Spray Nozzle
  • F Series Fine Misting Nozzle
    • AAZ Fine Atomized Nozzle
    • FD Anti-drop Misting Nozzle
    • FE Plastic Fine Misting Nozzle
    • PJ Smallest Physical Size
  • G Series Adjustable Clamp Nozzle
    • Adjustable Clamp nozzle
      • ——26988 Adjustabe Global spray Nozzle
      • ——27988 Adjustabe Global spray Nozzle
    • 26988RS Adjustabe Global spray Nozzle
  • I Series Spray Nozzle
    • PVDF nozzle
  • J Plastic Clamp Nozzle
    • J Plastic Clamp Nozzle
  • K Series Spray Nozzle For Special Purpose
    • K1 Air Absorption Flat Fan Spray Nozzle
    • K2 Mixing Fluid Nozzle
    • F Wind Nozzle
    • K4 Tank Wash Nozzle
    • K5 Spray-Dry Nozzle
    • 12810 Tank Cleaning Nozzle
  • L Series Paper and Pulp Nozzle
    • High pressure ceramic solid stream nozzle
    • Shower high pressure needle nozzle
    • Pagoda High Pressure Needle Nozzle
    • CCTC Series disc flat fan nozzle
    • Low Pressure Flat Fan Spray Nozzle
    • EQ Series Self-clean Spay Nozzle
  • N Series Nozzle pipe Line Accessories
    • 155RS Metal Adjustable Spray Nozzle
    • Metal Connectors
    • Solenoid Valves
    • Liquid Filter
    • Pressure Gauge

Company Profile

SIGMA International Co., Ltd. Located in San Francisco, California, is a company specializing in product development,manufacturing and international trade, technology import and export as an integrated enterprise, the name comes from SIGMA Six Sigma, it represents the highest quality and is closest to perfect pursuit. SIGMA processes forstrictcontrol of the production and quality to ensure the bestproducts available to consumers.

The company is the world’s Leading technology arena.SIGMA hiredhigh-tech talent people from Silicon Valley with a strong R & D team to make sigma develop high-quality products r and has a strong control over the supply chain , competitive price.

Spraying products and precision metal processing series are parts of the company’s products, which are managed by a dedicated team, SIGMA spray division sells the following products:

  1. Spray cleaning/washing products
  2. Spray humidification products
  3. Spray dust control/dust suppression products
  4. spray coating products
  5. Precision forged Products
  6. Precision casting Products
  7. CNC precision machined products
  8. Precision water filters and related accessories
Industrial Spray Nozzles

Advanced Equipments, Assurance of Quality

Our company import the made in Japan CNC machines with the precision exceeding 2p, and several U.S. precise punching machine with the precision reaching 0,01 mm. high pressure test bench and other precise granule test machines. Advanced equipment is the assurance for our quality improvement. The clients can select such materials as polypropylene, ceramics, alloy, imported 303. 304 or 316 stainless steel to make nozzle according to the actual conditions.

Industrial Spray Nozzles

Creative Technique and Design

“Life lies in movements, success lies in innovation”. Each worker of our Development Department, Production Department and Sales Department are dedicated in improving the performance and quality of spraying products. Basing on satisfying the existing clients, we are constantly forecasting the developing trend of spraying products, constantly innovate and improve our products such as the improv­ement of existed products, application of new materials and new testing equipments and methods as well as new service. We timely improve our making procedures and techniques according to the market feedback, thus completely integrating with the market and enabling the clients to enjoy the pleasure brought from new technology.

Industrial Spray Nozzles
Industrial Spray Nozzles

The most previous examination

In the profession. SIGMA utilizes of most advanced and most precise testing equipments.we achieve what we have reminded. We are dedicated in improving the testing equipments. We feature strict requirements to the suppliers (metal bars and plastic),Each procedure transporting tosloring is under strict control.We also present stricproducts checking,thus assuring to provide precise data to our clients.

Pursue global strategy target

SIGMA International Corp.LLC. is developing towards the target of world top company with the global strategy vision. All the staffs are devoting to satisfying the requirements of different clients in the world. The powerful R&D team and world wide sales network are capable of satisfying the requirements of the clients in settling the problems in nozzle, presenting project of improvement and even providing the manufacturers of nozzle parts, thus settling the problems of the suppliersor terminal clients, and achieving shared resources.

NO international competition, there’s no long term developmenl

Industrial Spray Nozzles

Extension of the product application

SIGMA features a wide variety of products. including universal cleaning nozzle, high pressure atomization nozzle. high pressure cleaning nozzle.from the ordinary workpiece cleaning to environment protection dust removing and desulfurizing to the corrosive carving and cleaning of electronic circuit board, from phosphoriz­ation to humidifying, lubricating, iron and steel dephosphorization.

Industrial Spray Nozzles

Plastic parts automatic coating treatment

Industrial Spray Nozzles

For cleaning and dust removing

Industrial Spray Nozzles

For corrosive carving and cleaning circuit board

Industrial Spray Nozzles

For cleaning e/ectropieled wires

Industrial Spray Nozzles

For auto parts surface treatment

Industrial Spray Nozzles

For automobile coating

Industrial Spray Nozzles

For distinguishing of drilling platform

Spraying Pattern

The spraying pattern of the nozzle consist of four types:
Industrial Spray Nozzles

1, Fan Fan

Industrial Spray Nozzles

2. Hollow Cone

Industrial Spray Nozzles

3. Full Cone

Industrial Spray Nozzles

4. Solid stream

The difference of Spraying Granule

Our company separate showering and spraying, it is called as spraying if the granule is less than 100mm. and showering more than 100mm. usually.The nozzle for spraying is used for workshop humidifying. artificial fog and spraying drying. However, nozzle for showering is mainly used for removing dust. cleaning and dephosphorizing for iron and steel.

Tolerance of Nozzle Flux and Angle

The tolerance of capacity of our nozzle is ±5%
5% The tolerance of angle of our nozzle is -±5
The tolerance of angle of solid stream is ±3′

Material Selection of the Nozzle

In various kinds of nozzles, SIGMA International Corp.LLC. has marked the materials on the products, the ordinary engineering PP nozzles are markedwith PP. stainless steel SS, brass BRASS, for see the table below for details:

Plastic Poly(vinyl chloride) PVC
Poly propylene PP
Polyphenylene oxide PPO
Acrylonitrile butadiene styrene ABS
Polyvinylidene Fluoride PVDF
Polyphenylene styrene PPS
Poly Tetra Fluoro Ethylene PTFE
Epoxy Resin ARALD I TE
Fibre Reinforced Plastic FRP
Matel BRASS BRASS
Stainless Steel 303SS
304 Stainless Steel 304SS
316 Stainless Steel 316SS
316L Stainless Steel 316LSS
Titanium TN
Hard Alloy CCA
Aluminum Alloy ALMA
Special Material Sapphire SAS
Carbuncle RUS
Graphite GRS
Ceramics SIS

A range of application

The application scope is widespread, penetrates into various areas,

the product has covered with surface treatment, electron, spinning and weaving, steel and iron, drugs manufacture. Increasing application scope evince that SIGMA’ S nozzle has been a dramatic influence

Industrial Spray Nozzles

Steel rolls cooling

Industrial Spray Nozzles

Humidify for space prevent electrostatic

Industrial Spray Nozzles

Humidify for mushroom cultivates

Industrial Spray Nozzles

Storage groove LNG

Washing

Semiconductor wafer cleaning Waste gas desulphurization
Cement mixer’s high-pressured cleaning
Brewage barrel’s self-cleaning
Processing chemical cleanings for automobile, –
motorcycle, domestic electric appliances and so on
High pressure washing Electronic circuit board cleaning circuil chemical washing
Beer bottle cleaning
mirror industry glass cleaning Clean the sand on the strainer Sand ,coal .gravel washing The paper mill wool blanket and nettings clean
Tank ans inside surface of tank clean
biscuit packaging environment for food-processing
Strainer and filter
Fruit & vegetables washing
bottle capsule clean far food-processing
mirror industry glass cleaning Olean Industrial equipment
Clean the article suspension chain
Metal cleaning and processing Container washing
High pressure water for disp hosph o ritation on-
the surface at rolled steel barrels self-cleaning
plastic containers cleaning
Various of Containers and 0il Tank cleaning
Clean the floor in processing workshop

Cooling

Cancle foctory’s gas ignition Steel continuous casting
skin coverage wire elongation project
plastic pipe forming
Cooling lower
conveyer belt calling
heat treatment before quenching
Die casting cooling
PVC pipe extrude cooling
The secondary cooling of billet continuous casting machine in Steel rolls cooling
storage tanks cooking Roof cooling
spiral condenser cooling chamber at kiln back end cooling
aluminium ware angioclast cooling
hoop rolling mill cooling tool and material calling
Before electroslal.c precipitation cooling and humidifying draper-type mullet’ cooling
drinks cooling
Wire stretch project cooling Plastic moldings cooling
Product direct and indirect cooking
Spray and temperature drop for equipment

Flurnidify for space and local resistance

Adjust air humidity printer)?
Prevent the plastic part Etectrostatio
:hermal Insulation in storeroom For bloat fresh fruit Hunidify for printery
silica gel and coating in press cylinder
oxygen chamber in hospital
lwig culling flowers freezing chamber
spray dryingl_CF-A facility adjust the temperature pavilion
qpray pond
Prevents the coated paper cambered surface to split mushroom cultivates
Humidify for iextile workshop
Hunidify for ceitophone
Cold holdIngroorn
Humid room
System for paper humidify
Humidify for corrugated paper system
Man-power snows machine
mist producer far garden

Spice additive industry

Products concoction
Hot water and gas lnvoive in the steam

AntiVirus and disinfection

Bottle capsule’s disinfection
Rice vessel’s backwoods coil countermeasure
disinfected cloth fon the food conveyor belt
Building clean

Dust control

dust control when conveying coal ash and sand
humidify the top of tram
wipe off dust from as tower
ferric oxide control in steel rolling
coal ash control when dumping coal
dust control al cement factory
dust control when conveying wooden hits
garbage clearing vehicle push down ash to ground
dust control in conveying_ loading and unloading garbage
wipe off dust from cupola

Spraying & Coating

sirup spray en sponge cake
(rustproof spray on iconoscope
sugar-coating
spray adhesives on construct plywoods
phosphorite metal parts
airless spray and spray paint
tablet coaling
entirust spray
papermaking material roll spray spray dye on products to identify cere.colophony and wet menstruum spray on medicament
baste before firing food
additive and condiment spray on food safe-guard coating on furniture
spray remover on mould
brick and color tile glazing
metal surface basting
wall spray of instrument and beverage tin deodorization In chimney
glue coating on printing roller
eggluica coating on cake and biscuit separant coating on metal
glazing and painting on tile
liquor spray on brick

Lubricate

lubricating and rust prevention on iron board
lube coaling on bottle
lube coating in punch project lube coaling on cable
lubricate gear
spray remover
lubricate conveyer belt and drive chain lubricate wire rope
molding lubricate on large-scale forge press
hydraulic pressure machine oiling
lubricate reamer slice and spring
lubricate axisand axtetree

itemoving & Peel off

papermaking,clean paper edge
volume label peel off bottles
separate option of quality control
dusl removing off glass board
paper machine finishing
metal sheet discerption before punch replacing indication of air condition filter

Dust prevention

grist deposits field conveying
prevent dusl from clinging after coating
cement and mill factory
prevent dust when conveying foundration
garbage clearing vehicle push down ash to ground wipe off dust from cupola
coal ash control when clumping coal
cement factory
dust let from chimney and incinerator

Surface treatment

spray anti-rust oil on metal pipe
ceramic tile glazing
dye marker of making corrugating mould separant coating on mould
protection spraying on glass board cure spraying in glass bottle

Agriculture & stockbreeding

(arming irrigation
spray pesticide
light a drought Irrigation
vegetation protection
grow fungus
spray root of crops
large-scale spraying of crops

Fire protection

&teethe appliance fitting section
pressure vessel
eoal store section
horizontal multilayer drier
rocket and missile test bed
house and common building
mine
convey belt channel
nuclear power( station fire protection
oil trough and gas trough fire protection oil station of tank car
rocket launcher fireproofing Insufflation deposited jar
pipeline of steel mill and operating mill Liquefied petroleum gas !rough and tank car shipping and pigboat
offing oil Field
transformer substation and farming machine substation bin char prevention

salt damage examination

salt damage test
salt damage examination
reaction lest

Gas control

air scrubbing in spray-paint boolh
air scrubbing in pipe and cleaning tower
remove sulfur dioxide 1( so, )
nitrogen oxides control l NOX ) deodorization of chimney
reactor cleanout system
air cleaning system of air control system Ferric oxide ash control in steel rolling centrifugal damp dust picker
remove dust from chimney and incinerator
spray ammonia to eliminate static

Industrial Spray Nozzles

Tower desultrurizatioe in power station

Industrial Spray Nozzles

ettaeai rnemt for car industry

Industrial Spray Nozzles

Textile wuccbhup humidification

Industrial Spray Nozzles

Coding in HorigKong Ocean Park

Industrial Spray Nozzles

Coding in HongKong Ocean Park

The principle of work of laser particle sizer in SIGMA

1, The laser will scatter around the granule, it is a method to connect the refraction image with the interference of the light The diameter tested is a bit smaller than the actual granule.
2, It farms two interference light stripes with crossing laser light, sense the scatters of the granule of the interference light with several light sensors in certain distance, thus calculating the diameter of the granule with the potential difference. This method is free of the influence of granule density and can test the speed of the granule simultaneously.

 
Industrial Spray Nozzles

The material of the nozzle has different effect to the wearable resistance of the liquid

The liquid flows at high speed at the mouth of the nozzle, therefore, the nozzle mouth will be easily worn. Different chemical liquid has different PI-1 value and viscosity, and has different friction to the nozzle. The friction to the nozzl is also different even the PH value and viscosity is the same if different materials are used. The hardness of ceramics (SIS) is 7 , and the wearable resistance is 20-30 times of stainless steel, bul ceramics is fragile and hard for making, alloy has high wearable resistance but also has high cost in making,stainless steel nozzle has a extremely wide application for it features high wearable resistance, though the price is higher than plastic but much lower than alloy and ceramic, therefore it is widely promoted. Engineering plastic nozzle has poor wearable resistance, but it features tow cost with perfect performance inchernical resistance, therefore it is the nozzle with most application.

The spraying angle of the nozzle is different under different pressure

Under different pressure, the spraying angle will change. Under low pressure, the angle is small and the cleaning strength is also small, when the pressure is gradually increasing, the spraying angle is also increasing, so does the cleaning strength, Different materials have different performance in enduring pressure, therefore, it is common that the nozzle is required to be used under standard pressure. If the nozzle is wearable. the Flux of it will change and the spraying angle will also change, the flux increases, the pressure drops and the spraying angle will also be small. the wearable spraying mouth will change the spraying direction. thus largely dropping the using efficiency.

Impact Force

The injection force differs in different injection shape under same pressure . The solid stream features highest impact, and then the fat fan, hollow cone and full cone.

Industrial Spray Nozzles

It is important to maintain the nozzle

Under different PH value, viscosity and pressure. nozzles made of different materials have different wearable resistance.Therefore, the clients should periodically clean and maintain even replace the nozzle according to the actual condition. The nozzle will be easily clogged when cleaning dirty work pieces.So you have to change the cleanness of the solution, filter the liquid, and periodically clean the nozzle for achieving normal injection effect. If the PH value of the solution is extremely strong. it is required to select nozzle made of anti-corrosion materials (316F and PVDF), if the density of the solution is extremely high, it is required to select nozzle with high wearable resistance (Ceramics, alloy),if the nozzle is jammed, the workpiece can’t be completely cleaned and the pump will run overloading, thus largely damaging the entire equipments, therefore, it is very important to maintain the nozzle.

Industrial Spray Nozzles
Industrial Spray Nozzles
Industrial Spray Nozzles

Conversion Unit

Changyuan Company has provided the following conversion unit for the client’s correct calculation when selecting the products.

Area
cm’ m2 in’ ft
1 1 X 10-4 0.155 1.08 / 10′
1X104 1 1.55/103 10.8
6.45 6.45X10-3 1 6.94 X 10-3
9.30 X 102 9.30 X 10-2 1.44 X 102 1
Length
ummmcmminft
11 x 10-31 x 10-41 x 10-63.94 X 10-53.28 x 10-6
1,00010.11 x 10-23.94 X 10-13.28 x 10-2
1×1041011 X 10-23.94 X 10-13.28 X 102
1 X 1071/10310013.94 x 103.28
2.54 X 10425.42.542.54 X 10-218.33 x 10-2
3.05 x 1053.05 X 1023.05 x 103.05 x 10-1121
Flow rate
L /Min m3/min m3/hr in3/hr ft3/h GAL: Metric GAL GAL: British GAL
1 0.001 0.06 3.66 X 103 2.12 0.264 0.22
1,000 1 60 3.66x 106 2.12 x 103 264 220
16.67 0.017 1 6.10)004 35.3 4.40 3.67
2.73×10-4 2.7X10-7 1.64×10-5 1 5.79 x 10-4 7.22 x 10-5 60.1 x 10-5
0.472 4.72×104 0.028 1.728 1 0.125 0.104
3.79 0.004 0.227 1.39 x 104 8.02 1 0.833
4.55 0.005 0.273 1,66 X 104 9.63 1.2 1
Pressure
KPa bar kg/cm2 ib/in2(p.si) Atm mHg mH2O(mAg)
1 0.01 0.01 0.145 9.87X10-3 7.50×10-3 0.102
100 1 1.020 14.5 0.987 0.750 10.2
98.07 0.981 1 14.22 0.968 0.736 10.01
6.89 0.069 0.070 1 0.068 0.052 0.704
1.01 X 102 1.013 1.033 14.7 1 0.76 10.34
1.33 X 102 1.33 1.36 19.3 1.32 1 13.61
9.807 0.098 0.10 1.42 0.097 0.073 1
Industrial Spray Nozzles
Industrial Spray Nozzles

SPRAY ANGLE AND COVERAGE

Tabulated spray angles indicate approximate coverages based on spray of or distribution of water in actual spraying the effiective spray angle varies with spray distance. Liquids more than water form relatively smaller spray angles (or even a solid stream ),depending upon viscosity , nozzle capacity and spraying pressure . Liquids with surface tensions lower than those listed for water This table lists the theoretical coverage of spray patterns as calculated from the included spray angle of the spray and the distance In actural pratice,the tabulated spray angle does not hold for long spray diatances if the spray coverage requirement is critical ,request data sheets for specific spray coverage data.

Industrial Spray Nozzles
spray angle The coverage under different distance(mm)
5cm 10cm 15cm 20cm 25cm 30cm 40cm 50cm 60cm 70cm 80cm 100m”
5° 0.4 0.9 1.3 1.8 2.2 2.6 3.5 4.4 5.2 6.1 7.0 8.7
10° 0.9 1.8 2.6 3.5 4.4 5.3 7.0 8.8 10.5 12.3 14.0 17.5
15° 1.3 2.6 4.0 5.3 6.6 7.9 10.5 13.2 15.8 18.4 21.1 26.3
20° 1.8 3.5 5.3 7.1 8.8 10.6 14.1 17.6 21.2 24.7 28.2 35.3
25° 2.2 4.4 6.7 8.9 11.1 13.3 17.7 22.2 26.6 31.0 35.5 44.3
30° 2.7 5.4 8.0 10.7 13.4 16.1 21.4 26,8 32.2 37.5 42.9 53.6
35° 3.2 6.3 9.5 12.6 15.8 18.9 25.2 31.5 37.8 44.1 50.5 63.1
40° 3.6 7.3 10.9 14.6 18.2 21.8 29.1 36.4 43.7 51.0 58.2 72.8
45° 4.1 8.3 12.4 16.6 20.7 24.9 33.1 41.4 49.7 58.0 66.3 82.8
50° 4.7 9.3 14.0 18.7 23.3 28.0 37.3 46.6 50.6 65.3 74.6 93.3
55° 5.2 10.4 15.6 20.8 26.0 31.2 41.7 52.1 62.5 72.9 83.3 104
60° 5.8 11.6 17.3 23.1 28.9 34.6 46.2 57.7 69.3 80.8 92.4 115
65° 6.4 12.7 19.1 25.5 31.9 38.2 51.0 63.7 76.5 89.2 102 127
70° 7.0 14.0 21.0 28.0 35.0 42.0 56.0 70,0 84.0 98.0 112 140
75° 7.7 15.4 23.0 30.7 38.4 46.0 61.4 76.7 92.1 107 123 153
80° 8.4 18.8 25.2 33.6 42.0 50.4 67.1 83.9 101 118 134 168
85° 9.2 18.3 27.5 36.7 45.8 55.0 73.3 91.6 110 128 147 183
90° 10.0 20.0 30.0 40.0 50.0 60.0 80.0 100 120 140 160 200
95° 10.9 21.8 32.7 43.7 54.6 65.5 87.3 109 131 153 175 218
100° 11.9 23.8 35.8 47.7 59.6 71.5 95.3 119 143 167 191 238
110° 14.3 28.6 42.9 57.1 71.4 85.7 114 143 171 200 229 286
120° 17.3 34.6 52.0 69.3 86.6 104 139 173 208 243
130° 21.5 42.9 64.3 85.8 107 129 172 215 257
140° 27.5 55.0 82.4 110 137 165 220 275
150° 37.3 74.6 112 149 187 224 299
160° 56.7 113 170 227 284
170° 114 229

The folow rate with the pressure

The spray performance are based on the same medium is corresponding to the square root of the pressure . Any nozzle can count the liquid at the prressure.

Industrial Spray Nozzles

Usage of Atomization Nozzle

Usage of Flat Fan Nozzle

The liquid of the flat fan nozzle is sprayed in fan with higher impact force than hollow cone and full cone, in order to achieve even flux when installing several fan-shaped nozzles, they are installed in mountain-shaped.

The flux distribution, spraying height, distance of the installation positions, spraying pressure and the liquid nature are different, if the performances of several nozzles are different, then the designed value and the actual value will also vary. Changyuan Company assures that the nozzles feature adequately precise for achieving uniform distribution.

Industrial Spray Nozzles
Industrial Spray Nozzles

Usage of Hollow Cone Nozzle

Under the condition that the spraying pressure, flux and angle are the same, the average granule of hollow cone nozzle is smallest. With average granule, the surface area of the workpiece exceeds and the surface is treated more fine, thus achieving smooth movement to the objects. The hollow cone nozzle has fine effect when it is used for gas cooling, air humidifying, metal treatment, dust control, gas cleaning and chemical reaction etc. In hollow cone nozzle, liquid is sprayed from the single hole under centrifugal effect, therefore, it has highest smooth diameter and is an ideal selection for the liquid which may easily deposit, for it can reduce clogging to the max.

* The clients may select suitable usage according to distribution. Installation Distribution of Hollow Cone Nozzle

Industrial Spray Nozzles

Usage of Full Cone Nozzle

Full Cone Nozzle consists of two varieties, the common type is equipped with built-in rotational flow leaves, but the special type not. It produce small -to medium-sized drops. The spraying area is round. Therefore, it is suitable for cleaning, bleaching, dust removing, distinguishing, corrosive carving and cleaning of electronic circuit board etc

* The clients may select suitable usage according to distribution. Installation Distribution of Hollow Cone Nozzle

Industrial Spray Nozzles
Selection of Strainer Nozzle will have use different strainer according to the using condition, rough strainer for the nozzle with big granule, and fine strainer for small granule. The specification of the strainer is confirmed according to the quantity, please refer to the table below:
The built-in strainer in the nozzle composes of strainer body, cap and strainer mesh.
Strainer mesh Distance of Mesh Granule (mm)
#200 0.07 Less than 0.2
#150 0.10 0.3-0.4
#100 0.15 0.5-0.7
#50 0.30 0.8-0.9
Industrial Spray Nozzles

AA Series Corner Nozzle

Hollow Cone Spray Nozzle/Corner Nozzle

Industrial Spray Nozzles

AA/A Metal Nozzles feature a hollow cone spray pattern with a ring-shaped impact area and spray angles of 51 to 144.

They produce small-to medium sized drops at a wide range of flow rates and pressures.

AA/A Metal Nozzles are ideal choice for applications requiring good atomization of liquids at lower pressures or when quick heat transfer or effective airborne droplet impingement is required.

AA/A Metal Nozzles have special whirlchamber.They feature large and unobstructed flow passages, which minimize or eliminate clo-gging.

AA Metal Nozzles have outer screw thread connection, while A Metal Nozzles have inner screw thread connection.

Common applications

  • Gas Washing and Gas Cooling Water Cooling
  • Dust Control
  • Metal Treating
  • Chemical Reaction Treating
  • Other Heat Transfer Applications

Ordering info

Industrial Spray Nozzles

Remark:Brass SS-Stainless Steel
3 16S5-31 6 Stainless Steel

Performance data

Industrial Spray Nozzles

Desulfurization Tower Auto Spraying Before Painting Spraying Of Power Plant

 
Nozzle Inlet Conn. Capacity Size Nozzle Tye Material code Body Inlet Dia. (mm) Rated Orifice Dia. (mrn) Capacity liters per minute Spray angle
AA A BRASS SS 316SS 0.2 bar 0.5 bar 1 bar 1.5 bar 2 bar 3 bar 4 bar 5 bar 6 bar 7 bar 0.5 bar 1.5 bar 6 bar
1/8 O. 5 0.79 1.2 0.16 0.23 0.28 0.32 0.39 0.46 0.51 0.56 0.60 58′ 69′
1 1.6 1.6 0.32 0.46 0.56 0.61 0.79 0.91 1.1 1.1 1.2 64′ 76°
2 2.0 2.0 0.64 1.91 1.1 1.3 1.6 1.8 2.0 2.2 2.4 52° 61′ 69′
3 2.4 2.4 0.97 1.4 1.7 1.9 2.4 2.7 3.1 3.3 3.6 520 64° 77°
5 3.2 3.2 1.0 1.6 2.3 2.8 3.2 3.9 4.6 5.1 5.6 6.0 56° 67′ 76°
8 4.0 4.0 1.6 2.6 3.6 4.5 5.2 6.3 7.3 8.2 8.9 9.6 56° 65° 70°
10 4.4 4.4 2.0 3.2 4.6 5.6 6.4 7.9 9.1 10.2 11.2 12.1 55° 65° 72°
1/4 1 1.6 1.6 0.46 0.56 0.64 0.79 0.91 1.0 1.1 1.2 53° 67°
2 2.0 2.0 0.64 0.91 1.1 1.3 1.6 1.8 2.0 2.2 2.4 62° 71′
3 2.4 2.4 0.97 1.4 1.7 1.9 2.4 2.7 3.1 3.3 3.6 51° 65° 78′
5 3.6 3.6 1.0 1.6 2.3 2.8 3.2 3.9 4.6 5.1 5.6 6.0 63°’ 73° 79′
8 4.0 4.0 1.6 2.6 3.6 4.5 5.2 6.3 7.3 8.2 8.9 9.6 61° 69° 73°
10 4.8 4.4 2.0 3.2 4.6 5.6 6.4 7.9 9.1 10.2 11.2 12.1 63° 70° 74°
15 5.9 5.2 3.1 4.8 6.8 8.4 9.7 11.8 13.7 15.1 16.7 18.1 63° 71° 72°
3/8 5 3.6 3.2 1.0 1.6 2. 3 2.8 3.2 3.9 4.6 5. I 5.6 6.0 64′ 73′ 79′
8 4.4 4.0 1.6 2.6 3.6 4.5 5.2 6.3 7.3 8.2 8.9 9.6 62° 70° 74°
10 5.2 4.4 2.0 3.2 4.6 5.6 6.4 7.9 9.1 10.2 11.2 12  1 64° 72′ 75°
15 5.9 5.6 3.1 4.6 6.8 8.4 9.7 11.8 13.7 15.3 16.7 18.1 64° 72′ 74′
20 7.1 6.4 4.1 .6.4 9.1 11.2 12.9 15.8 18.2 20 22 24 63° 70° 74°
25 7.5 7.5 5.1 8.1 11.4 14.0 16.1 19.7 23 25 28 30 63° 70° 74°
30 8.3 7.9 6.1 9.7 13. 7 16.7 19.3 24 27 31 33 36 63° 70° 74°
1/2 25 9.5 6.4 5. 1 8.  1 11.4 14.0 16.1 19.7 23 25 28 30 63° 66° 71°
30 9.5 7.5 6. 1 9.7 13.7 16.7 19.3 24 27 31 33 36 67° 71° 75°
40 9. 5 9. 1 8. 2 12.9 18.2 22 26 32 36 41 45 48 72° 76° 78°
50 9.5 11.1 10.2 16.1 23 28 32 39 46 51 56 60 74′ 79° 82°
60 9.5 13.1 12.2 19.3 27 33 39 47 55 61 67 72 77 82 86′

Wide Angle Nozzle Type

Nozzle Inlet Conn. Capacity Size Nozzle Tye Material code Body Inlet Dia. (mm) Rated Orifice Dia. (mrn) Capacity liters per minute Spray angle
AA A BRASS SS 316SS 0.2 bar 0.5 bar 1 bar 1.5 bar 2 bar 3 bar 4 bar 5 bar 6 bar 7 bar 0.5 bar 1.5 bar 6 bar
1/8 0.5-0.5W 0.79 1.2 0.23 0.28 0.32 0.39 0.46 0.51 0.56 0.6 117° 98°
1-1W 1.6 1.6 0.46 0.56 0.64 0.79 0.91 1.0 1.1 12 125° 110°
2-3W 2.0 2.8 0.81 1. 1 1.4 1.6 2.0 2.3 2.5 2.8 2.9 114° 114°
3-3W 2.4 2.8 0.97 1.4 1.7 1.9 2.4 2.7 3.1 3.3 3.7 114° 114° 97°
3-5W 2.4 3.2 1.1 1.5 1.9 2.2 2.7 3.1 3.5 3.8 4.0 116′ 110° 95°
2-10W 2.0 4.4 1.3 1.9 2.3 2.6 3.2 3.7 4.2 4.6 5.0 130° 135° 120°
5-5W 3.2 3.2 1.6 2.3 2.8 3.2 3.9 4.6 5.1 5.5 6.1 116° 110° 92°
5-10W 3.2 4.4 1.3 2.1 3.0 3.6 4.2 5.1 5.9 6.6 7.3 7.9 126° 121° 95°
8-10W 4.0 4.4 1,8 2.9 4. 1 5.0 5.8 7.1 8.2 9.2 10.0 10.8 124′ 112° 90°
1/4 1-1W 1.6 1.6 0.46 0.56 0.64 0.79 0.91 1.0 1.1 1.2 117″ 111′
1-5W 1.6 3.2 0.77 0.95 1.1 1.3 1.5 1.7 1.9 2.0 123′ 124′
1-10W 1.6 4.4 0.96 1.2 1.4 1.7 1.9 2.1 2.3 2.5 144° 139′
1-15W 1.6 5.6 1.1 1.3 1.5 1.9 2.2 2.4 2.7 2.9 128° 132°
2-5W 2.0 3.2 1.1 1.5 1.9 2.2 2.7 3.1 3.5 3.8 4.0 118° 123° 113°
2-10W 2.0 4.4 1.3 1.9 2.3 2.6 3.2 3.7 4.2 4.6 5.0 138° 136° 126°
5-5W 3.6 3.2 1.6 2.3 2.8 3.2 3.9 4.6 5.1 5.6 6.1 114′ 113° 104°
5-10W 3.6 4.4 1.3 2.1 3.0 3.6 4.2 5.1 5.9 6.6 7.3 7.9 130: 130° 119′
5-15W 3.6 5.6 1.6 2.5 3.5 4.3 5.0 6.1 7.0 7.8 8.6 9.3 130′ 132° 120°
8-10W 4.0 4.4 1.8 2.9 4.1 5.0 5.8 7.1 8.2 92 10.0 10.8 129′ 122° 103°
10-10W 4.8 4.4 2.0 3.2 4.6 5.6 6.4 7.9 9.1 10.2 11.2 12.2 120° 108° 95°
8-15W 4.0 5.6 2.2 3.5 5:0 6.1 7.1 8.7 10.0 11.2 12.3 13.2 129′ 122° 107°
10-15W 4.8 5.6 2.4 3.9 5.5 6.7 7.7 9.5 10.9 12.2 13.4 14.6 120′ 108° 97°
15-15W 4.0 5.6 3.0 4.8 6.8 8,4 9.7 11.8 13.7 15.3 16.7 18.0 101′ 95′ 90°
3/8 5-10W 4.8 4.4 1.3 2.1 3.0 3.6 4.2 5.1 5.9 6.6 7.3 7.9 130: 123° 102°
5-15W 6.0 5.6 1.6 2.5 3.5 4.3 5.0 6.1 7.0 7.8 8.6 9.3 138′ 131° 112°
8-10W 3.6 4.4 1.8 2.9 4.1 5,0 5.8 7.1 8.2 9.2 10.0 10.8 122′ 110° 96°
10-10W 3.6 4.4 2.0 3.2 4.6 5,6 6.4 7.9 9.1 10.2 11. 12.2 116° 108° 93°
8-15W _s 4_4 5.6 2.2 3.5 5.0 6.1 7.1 8.7 10.0 11.2 12.3 13.2 133′ 120° 106°
10-15W 5.2 5.6 2.4 3.9 5.5 6.7 7.7 9.5 10.9 12.2 13.4 14.6 126′ 115° 100°
8-25W 4.4 7.5 2.6 4.2 5.9 7.3 8.4 10.3 11.9 13.3 14.5 15.6 122′ 118° 109°
10-20W 5-2 6-0 2.9 4.5 6.4 7.8 9.0 11.1 12.8 14.3 15.6 16.9 118′ 112° 102°
15-15W 6.0 5.6 3.0 4,8 6.8 8.4 9.7 11.8 13.7 15.3 16.7 18.0 116° 106° 95°
15-20W 6.0 6,0 3.4 5.5 7.7 9.5 11.0 13.4 15.5 17.3 16.0 20.4 113° 108° 98°
20-20W 7.1 6.0 4.1 6.4 9.1 11.2 12.9 15.8 18.2 20 22 24.1 106° 102° 95°
15-30W 6.0 7.9 4.5 7.1 10.0 12.3 14.2 17.4 20 22 25 26.5 116° 110° 102°
25-25W 7.5 7.5 5.1 8.1 11.4 14.0 16.0 19.7 23 25 28 30.2 105 100° 93°
25-30W 7.5 7,9 5.7 9.0 12.8 15.6 18.0 22 26 29 31 33.9 105° 101° 94°
1/2 50-50W 9.5 11.1 10.2 16.1 23 28 32 39 46 51 56 60.9 110° 102° 93°

The design feature of mid-high flow rate foundry nozzle

AASR catamaran casting style 1- 1/4 –4 NPT or BSPT (Female )

The spraying style of mid-high spray pattern is hollow cone with ring impact area ; it has two series of spraying angle, narrow angles from 45′ to 52 °, standard angles from 60′ to 86′ _Spray tips can be made of carborundum.

AAS catamaran casting style The size is 6″ joint

Spray pattern with uniform distribution ,samll-to medium sized drops under a large-scale flow rate and pressure. AASR, AAS and AASB series assembly nozzles were made of casting brass, casting iron or 316 SS casting of refined polishing. The size of 1-114 ” , 2 ” and 3 ” nozzle were made of 316SS casting that has 304 SS spray tip.

AASR catamaran casting style 2-6 inch joint

AASB catamaran casting style 2-6 inch joint Casting Style

AASB nozzle of catamaran design can be made of several kinds of wearable material. The spray tip can be made of stainless steel or carborundum for harsh environment. These kinds of nozzle size has 2″ , 3 , 4″ and 6″ . All
of AASR, AASB and AAS nozzle had big and unblocked channel. Thereby, it avoids the clogging on the whole.

Industrial Spray Nozzles
Industrial Spray Nozzles

Performance data

Industrial Spray Nozzles

N-sic material performance data

Temperature Heat transfer parameter multi-gap rate heat expansion parameter flexural strength Mohs’scale of hardness Acid corrosion
<1400C <45w/m.k <0.1% 4.5k-1X10-6 600mPa >13 Excellent

Design features of AASW large flow carbide silicone spray nozzle

1.Spray consistency is uniform.
2.Spray liquid droplets distribute at a large range
3.The spray liquid droplet size is 20%-80% smaller than other hollow cone-shaped nozzles’.

The graph given below is the compare data between AASW spray nozzle and common hollow cone-shaped nozzles at the same flow rate.It’s easy to find that the spray liquid droplets of AASW spray nozzle distribute at a larger range,so that it can minimize the spray consistency consumedly;Meanwhile.its droplet size is 50% smaller than common hollow cone-shaped nozzles.

Industrial Spray Nozzles

flow rate and size of AASW

hollow cone-shaped,wide angle.1″ to 3″ size BSP or NPT screw thread.

flange inlet Nozzle Type Spray angle K coefficient Capacity(L/min) inlet size Capacity size Size Weight
0.3 bar 1 bar 3 bar 0.2 bar 0.3 bar 0.5 bar 0.7 bar 1 bar 1.5 bar 2 bar 3 bar A B C D
2 SW 8516 112 115 115 194 86.6 106 137 162 194 237 274 336 21.8 21.8 91.9 130 114 70.6 1.81
SW 10516 120 122 122 239 107 131 169 200 239 293 338 414 25.4 25.4
SW 12516 119 122 122′ 285 127 156 201 328 285 349 403 493 29.0 29.0
SW 14516 122 125 125 330 148 181 234 276 330 405 467 572 32.1 32.1
SW 17016 125 125 125 387 173 212 274 324 387 474 548 671 35.3 35.3
SW 19216 125 125 125 438 196 240 309 366 438 536 619 758 38.5 36.5
SW 20516 125 125 125 467 209 256 330 391 467 572 661 809 41.3 36.5
SW 23016 125 125 125 524 234 287 371 439 524 642 741 908 44.5 36.5
21/2 SW 17020 117 120 120 387 173 212 274 324 387 474 548 671 331 33.7 125 172 143 88.1 2.90
SW 19020 117 120 120 433 194 237 306 362 433 530 612 750 36.1 36.1
SW 20520 117 120 120 467 209 256 330 391 467 572 661 809 37.3 37.3
SW 23020 123 125 125 524 234 287 371 439 524 642 741 908 40.1 40.1
SW 28020 128 130 130 638 285 349 451 534 638 781 902 1110 46.0 44.5
SW 32020 128 130 130 729 326 399 516 610 729 893 1030 1260 51.2 44.5
SW 34020 128 130 130 775 347 424 548 648 775 949 1100 1340 53.2 44.5
SW 43520 128 130 130 991 443 543 701 829 991 1210 1400 1720 61.9 44.5
3 SW 18524 122 122 122 422 189 231 298 353 422 516 596 730 32.5 32.5 145 200 173 109 4.08
SW 23024 122 122 122 524 234 287 371 439 524 642 741 908 36.5 36.5
SW 28024 122 122 122 638 285 349 451 534 538 781 902 1110 41.3 41.3
SW 32024 125 125 125 729 326 399 516 610 729 893 1030 1260 45.2 45.2
SW 34024 125 125 125 775 347 424 548 648 775 949 1100 1340 46.8 46.8
SW 12224 128 130 130 939 420 514 664 786 939 1150 1330 1630 53.6 53.6
SW 46924 129 132 135 1070 478 585 756 894 1070 1310 1510 1850 57.9 54.0
SW 52624 129 132′ 135 1200 536 657 848 1000 1200 1470 1700 2080 63.1 54.0
SW 56424 129 132 135 1290 575 704 909 1080 1290 1570 1820 2230 65.9 54.0

flow rate L/M=K Bar
standard material: Brass.carbon steel and 316 stainless steel
The pic given below is AASW spray nozzle joint, to join many nozzles.

Industrial Spray Nozzles

AD Series

Industrial Spray Nozzles
Industrial Spray Nozzles

Design features of beeline type hollow cone-shaped spray nozzle

Beeline type hollow cone-shaped spray nozzle can produce hollow cone-shaped spraying,and spray area is annular with its uniform distribution.

The nozzles spray into small liquid droplets and can avoid clogging with its large and easy passing routeway.

The spray cap can be interchanged between pipes of different size.It can produce a spray pattern of wide spray angle.

The section projection of this beeline nozzle is a bit of low when it’s connected with T joint or pipe collection, it’s widely used in coal ash control.

size and weight

Nozzle type F F B (mm) C (mm) Net weight (Kilogram)
3/8AD- 28 32 17.5six angles 0,03
1/2AD- 32.5 37.5 22.2Six angles 0.06
3/4AD- 38 44.5 27.0six angles 0.11
11/2AD- 60.5 66.5 50.8six angles 0.60
Industrial Spray Nozzles

Performance data

Nozzle Inlet Conn. NPT or BSPT(out) Nozzle Type Size Capacity Inlet Dia. Size (mm) Rated Orifice Dia. (mm) Capacity (L/min) Spray angle
AD 0.2 bar 0.5 bar 0.7 bar 1 bar 1.5 bar 2 bar 3 bar 4 bar 5 bar 6 bar 7 bar 0.5 bar 1.5 bar 6 bar
3’8 2 2.4 2.0 0.76 0.91 1.1 1.6 1.8 2.0 2.2 2.4 60° 70°
3 2.4 2.4 0.96 1.1 1.4 1.7 1.9 2.4 2.7 3.1 3.3 3.6 52° 64° 77°
2.8 3.2 1.0 1.6 1.9 2.3 2.8 3.2 3.9 4.6 5.1 5.6 6.0 56° 67° 76°
8 4.0 4.0 1.6 2.6 3.1 3.6 4.5 5.2 6.3 7.3 8.2 8.9 9.6 56° 65. 70°
10 4.0 4.4 2.0 3.2 3.8 4.6 5.6 6.4 7.9 9.1 10.2 11.2 12.1 55° 65° 72.
20-10 *4.0 4.4 4.5 5.3 6.4 7.8 9.0 11.1 12.8 14.3 15.6 16.9 61° 65° 67°
12 5 3.2 3.6 1.0 1.6 1.9 2.3 2.8 3.2 3.9 4.6 5.1 5.6 6.0 63° 73° 70°
8 4.0 4.0 1.6 2.6 3.1 3.6 4.5 5.2 6.3 7.3 8.2 8.9 9.6 61° 69° 73°
10 4.4 4.4 2.0 3.2 3.8 4.6 5.6 6.4 7.9 9.1 10.2 11.2 12.1 63° 70° 74°
15 *4.4 5.2 3.1 4.8 5.7 6.8 8.4 9.7 11.8 13.7 15.3 16.7 18.1 60° 67° 70°
20 *4.8 6.0 4.1 6.4 7.6 9.1 11.2 12.9 15.8 18.2 20 22 24 63° 65° 69°
25 7.1 5.1 8.1 9.5 23 25 28 30 59° 63° 68°
3/4 5 3.6 3.2 1.0 1.6 1.9 2.3 2.8 3.2 3.9 4.6 5.1 5.6 6.0 64° 73° 79°
8 4.4 4.0 1.6 2.6 3.1 3.6 4.5 5.2 6.3 7.3 8.2 8.9 9.6 62° 70. 74°
10 5.2 4.4 2.0 3.2 3.8 4.6 5.6 6.4 7.9 9.1 10.2 11.2 12.1 64° 72° 75°
15 6.4 5.6 3.1 4.8 5.7 6.8 8.4 9.7 11.8 13.7 15.3 16.7 18.1 64° 72° 72°
20 7.1 6.4 4.1 6.4 7.6 9.1 11.2 12.9 15.8 18.2 20 22 24 63° 70° 74°
25 7.1 7.5 5.1 8.1 9.5 11.4 14.0 16.1 19.7 23 25 28 30 63° 70° 74°
50-50.3 .7.1 9.5 10.2 16.1 19.1 23 28 32 39 46 51 56 60 70° 72° 73°
1-1/2 40 ’95 7.9 8.2 12.9 15.3 18.2 22 26 32 36 41 45 48 70° 73
50 *9.5 9.5 10.2 16.1 19.1 23 28 32 39 46 51 56 60 72° 75′ 77°
60 ‘9.5 11.1 12.2 19.3 23 27 33 39 47 55 61 67 72 74° 76° 79°
70 *9.5 12.7 14.3 23 27 32 39 45 55 64 71 78 84 76° 79° 83°
80 *9.5 14.3 16.3 26 31 36 45 52 63 73 82 89 96 78° 82° 84°
90 *9.5 14.7 18.3 29 34 41 50 58 71 82 92 100 109 81° 84° 84°
100 ‘9.5 15.9 20 32 38 46 56 64 79 91 102 112 121 83° 86° 86°
110 *9.5 17.1 22 35 42 50 61 87 100 112 123 133 85° 88° 88°
120 *9.5 18.3 24 39 46 55 67 77 95 109 122 134 145 87° 90° 90°

AF Series Hollow Cone Spray Nozzle

AF Hollow Cone

Industrial Spray Nozzles

Features and Benefits

  • Hollow cone spray pattern with a ringshaped impact area.
  • Small-to-medium-sized drops.
  • Deflection angles determined by deflector cap:120°, 150° and 180° included angle of spray at 0.7bar(10psi).
  • Uniform distribution over a wide range of flow rates and pressures.
 

Performance data

Industrial Spray Nozzles
Industrial Spray Nozzles

Dimensions and weights

Industrial Spray Nozzles

APPLICATIONS

  • Hollow cone spray pattern with a ringshaped impact area.
  • Small-to-medium-sized drops.
  • Deflection angles determined by deflector cap:120°, 150° and 180° included angle of spray at 0.7bar(10psi).
  • Uniform distribution over a wide range of flow rates and pressures.
 

BB Series Full Cone Spray Nozzle

BB standard angle series spray nozzles feature a full cone spray pattern with a round impact area and spray angles between 43° and 106°.

They produce a uniform distribution of medium to large sized drops over a wide range of flow rates and pressures.Their uniform spray distribution result from a unique vane design, large and easy flow passages and superior spray control design.

Machined critically, BB series metal nozzles insure correct and dependable performance with exact sizes.They are ideal for applications requiring complete coverage to a certain area.

BBG series metal nozzles have removable cap and vane,can be suitably connected with pipe collection and multi-pipe.Under this design way, its working-end(cap and vane) can be removefrom the nozzle body to be overhauled and cleaned, without knocking down the nozzle body off the pipe.

standard angle series

Industrial Spray Nozzles

BB-single type external thread B-single type internal thread BBG-fission type external thread BC-fission type internal thread

Dimensions and weights

  • exhaust gas scrubbing
  • quenching and cooling
  • fire prevention and fire protection
  • dust extinguishing control
  • defoaming
  • spraying applications
Industrial Spray Nozzles

standard angle performance data

Nozzle inlet connect (in.)Nozzle typeCapacity SizeRated Orifice Dia,(mm)Max. Hole Dia. (mm)Capacity(l/min)Spray Angle(°)*
Standard type
BGBBGBBB0.40.50.71.523467100.51.56
1/8 1.79.64.29.33.38.54.62.74.851.01.11,3 5853
 1.51.2.64.44.49.57.81.931.11.31.51.61.9526559
 21.21.0.59.65761.11.21,51.72.02.22.6435046
 31.51.0.88.981.11.131.97.22.53.13_33.9526559
 3.51.61.31.01.11.31.92.22.6103.63.84.5435046
 3.92.01.01.11.31,52.12.42.93.34.04.35,1778479
 52.01.31.51.61.92.73.13.74.25.15.56.5526559
 6.12.31.31.82.02.33.33.84.55.26.26.77.9697468
1/4 6.52.41.61.92.12.53.54.04.85.56,77.18.4 455046
 103.21.62.93.33.85.46.21.48.510.211.013.0586761
 12.53.21.63.74.14.86.87.79.310.612.813.716.2697468
3/8 9.52.62.42.83.13,65.15.97.18.19.710.412.3455046
 153.62.44.44.95.78.19.311.212.715.416.519.4646761
 204.02.85.96.57.610.812.414.917.0202226768073
 224.52.86.57.28.411.913.616.418.7232428879082
1/2 163.53.24.75.26.18.79.911.913.616.417.621485046
 254.63.27.48.29.513.515.418.621262732646761
 325.23.69.410.412.217,319.82427333541727568
 406.23.611.813.115.222253034414452889183
 506.74.014.716.319.127313742515565919486
3/4  2.54.94.48.79.611.215.918.22225303238485046
  4.06.44.413.915.418.026293540485261677063
  7.09.55.2242731455161708491107899284
1  4.26.05.614.616.218.927313742515464485046
  7.08.35.6242731455161708491107676862
   8.09.55.62831365158708097104122728182
  1011.95.6353845647388100121130153789094
  1211.96.44246547787105120145155183899284
1-1/4  67.46.421232738445360727892485044
  109.66.4353845647388100121130153646758
  1210.76.44246547787105120145155183667060
  1412.36.4495463891021231401691812141778070
  1612.77.9566272102116140160193207244737666
  2015.17.9697790128146175200241259305909381
1-1/2  109.58.7353845647388100121130153485044
  1612.78.7566272102116140160193207244727464
  2014.38.7697790128146175200241259305747066
  3018.310.3104115135191218263300362389458919482
2  1712.711.1596576108124149170205220259495044
  3017.311.1104115135191218263300362389458727464
  3519.211.1122135157223255307350422453534757768
  4021.011.1139154180255291351401483518611788010
  5023.814.3174192225319364439501603648763838575
  6028.614.32082312693834375266017247779169810088

The Max. Hole Diameter indicated above is the maximum diameter of the particles that can pass through thechannel and do not block.

wide angle series

BB wide angle series spray nozzles feature a solid cone spray pattern with a round impact area and spray angles between 120′ and 1200.

They produce a uniform distribution of medium to large sized drops over a wide range of flow rates and pressures. They are ideal choice for applications requiring complete coverage to a certain area.

With the uniform spray distribution resulting from a unique vane design and exact size, the nozzles insure correct and dependable performance.

Industrial Spray Nozzles
Industrial Spray Nozzles

Wide angle performance data

Nozzle inlet connect (in.) Nozzle type Capacity Size Rated orifice Dia.(mm) Max. Hole Dia(mm) Capacity(l/min)* Spray Angie(0)*
Standard type
BG-W BBG-W BB-W B-W 0.4 0.5 0.7 1 1.5 2 3 4 6 0.4 0.7 6
1/8 15W 1.2 .64 .57 .67 .81 .93 1.1 1,3 15 120 86
28W 1.6 1.0 1.1 1.3 1,5 1.7 2.1 2.4 29 120 102
4 3W 2.0 1.0 1.6 1.9 2.3 2.7 3.2 3.7 4.4 120 102
5.6W 2.4 1.0 1.8 2.1 2.5 3.0 3.5 4.2 4.8 5.7 120 102
8W 2.4 1.3 2.6 3.0  3.6 4.3 4.9 6.0  6.8 8.2 120 103
1\4 10W 2.8 1.3 2.9 3.3 3.8 4.5 5.4 6.2 7.4 8.5 10.2 112 120 103
12W 3.2 1.3 3.5 3.9 4.6 5.4 6.5 7.4 8.9 10.2 12.3 114 120 103
14W 3.6 1.6 4.1 4.6 5.3 6.3 7.6 8.6 10.4 11.9 14.3 114 120 103
3\8 17W 4.0 1.6 5_0 5.6  6.5 7.6 9.2 10.5 12.7 14.4 17.4 114 120 103
20W 4.4 2.4 5.9 6.5 7.6 9.0 10.8 12.4 14.9 17.0 20 114 1’20 101
24W 4.8 2.4 71 7.8 9.1 10.8 13.0 14.8 17.9 20 25 114 120 104
27W 5.2 2.8 8.0 8.8 10.3 12.1 14.6 16.7 20 23 28 114 120 100
1\2 30W 5.6 2.8 8.8 9.8 11.4 13.5 16.2 18.5 22 25 31 114 120 108
35W 6.0 3.2 10.3 11.4 13.3 15.7 18.9 72 25 30 35 114 120 100
40W 6.4 3.2 11.8 13.1 15.2 18.0 22 25 30 34 41 114 120 100
45W 6 4 3.6 13 3 14.7 17.2 20 24 28 34 38 45 114 120 110
50W 6.7 4.0 14 7 16.3 19.1 22 27 31 37 42 51 114 120 112
3\4 6W 9.9 4.4 21 23 27 31 37 42 51 50 69 115 120 112
1 11W 13.1 5.6 38 42 49 57 69 78 93 106 126 117 :20 117
1-1,4 16W 15.5 6.4 56 67 71 83 100 113 135 154 104 118 121 119
1-1/2 24W 18.3 10.3 84 92 107 125 150 170 203 230 275 119 124 119
2 47W 25.0 11.1 154 181 210 245 293 333 398 451 539 120 124 119
2-1(2 70W 31.8 14.3 244 269 312 365 436 495 592 672 803 120 125 119
3 95W 34.9 17.5 331 365 424 496 592 672 803 912 1090 120 125 119
4 188W 50.8 20.6 655 723 838 981 1172 1330 1590 1805 2157 120 125 119
The Max. Hole Diameter indicated above is the maximum diameter of the particles that can pass through thechan lel and do not block.

common application

  • Washing and drenching, exhaust gas scrubbing and cooling to remove dust and other burnt offspring.
  • Quenching and cooling coke,primary metal and other material, burst apart and defoaming of foaming material, spray in chemical
  • Dust control when transacting chunk ore,coal.limestone,sand and carpolite.
  • Dip the tinder and container to prevent a fire and put out a fire.
Industrial Spray Nozzles
Industrial Spray Nozzles

Square standard angle series

Industrial Spray Nozzles

common application

  • Cooling and quenching
  • Products washing
  • Air and gas washer
  • Scrubbing machine
  • Dust control
  • Fire prevention

Square wide angle nozzle

Industrial Spray Nozzles

common application

  • Air and gas washers
  • Cooling /quenching
  • Dust control
  • Fire suppression /prevention
  • Liquor washers
  • Product washing /rinsing
  • Scrubbers

B B square standard angle series spray nozzles feature a solid cone spray pattern with a foursquare area and spray angles between 40° to 105°.

They produce a uniform distribution of medium to large sized drops over a wide range of flow rates and pressures. Their uniform spray distribution result from a unique vane design,large and easy flow passages and superior spray control design.They are ideal for applications requiring complete coverage to a certain area.

Square standard angle performance data

Nozzle inlet connect NPT or BSPTNozzle typeCapacity SizeRated Orifice Dia, (mm)Max. Hole Dia, (mm)Capacity(l/min)*Spray Angle(°)*
BBBBG0.3 bar0.5 bar1 bar2 bar3 bar4 bar5 bar6 bar7 bar10 bar0.5 bar1.5 bar6 bar
1/83.6 SQ1.61.30.931.21.62.22.73.13.43,74.04.740°52°47°
4.8 SQ1.91.31.21.6j 2.23.03.64.14.514.95.36.248°63°57°
6 SQ2.41. 31.52.0I2.73.74.55.15.66.16.67.860°66°60°
1/410 SQ2.81.62.63.34.56.27.48.59.410.211.013.062°67°61°
12S03.21.63.13.9. 5.47.48.910.211.312.313.215.570°75°68°
14.5 SO3.91.  63.74.76.59.010,812.313.714.815.918.878 .82′75 0
3/818 804.02.  44.65.98.111.113.415.317.018.419.82371 .75′68 0
1/229805.63.27.59.513.017.922252730323871°75°68°
 36SQ6.43.29.311.816.22227313437404778°82°75°
3/4 50SQ6.74,412.916.3223137424751556571°75°68°
1 106SQ9.95.627354865799010010911713778°80°73°
1-1/4 1775012.76.446587910913215016718119523078°80°73°
1-1/2 230S014. 38. 7597510314217119522023525530073°77°70°
2 290S015.511. 1759513017921525027530032037566°70°64°
 360SQ17.411. 193118162225270305340.37039547070°74°67°
 480SQ21.011.112415721530036041045549553063079°82°74°
2-1/2 490SQ19.814.312616022030536542046551054064062°67°61°
  590SQ22.214. 315219326536544051056061065077075°78°71°
 950SQ28.617. 52453104305907108109009801050123081°84°76°

Wide angle square spray nozzle feature a full cone spray pattern with square impact area and spray angles of 93°-115c. small-to medium-sized drops.

Unique vane design provides uniform spray distribution.

They are idea choicel for installations requiring uniform coverage of rectangular or square are¬as. Size1-1/4 ” and larger are case-type nozzles with removable vanes.

Square wide angle performance dat

Industrial Spray Nozzles
Industrial Spray Nozzles

Narrow angle nozzles for 15°

Industrial Spray Nozzles

Narrow angle nozzles for 30°

Industrial Spray Nozzles

BB Series narrow angle nozzles feature a full cone spray pattern with a round impact area and spray angles of 300 or 15°.

They produce a uniform distribution of medium to large sized drops and provide signifi­cantly higher impact per unit area than wider angle nozzles at the same flow rate, and all have removable cap and vanes.

The size 1/8″ and 1-1/4″ are made from steel bar while size 1-1/4 and larger are cast-in­ block.The narrow angle nozzle is made of thick and thin process, which realizes the accur­ate specification to ensure the best performance.Unique vane design provides superior control and uniform distribution.

performance data

Industrial Spray Nozzles

performance data

Industrial Spray Nozzles
Industrial Spray Nozzles

CC Series Flat Fan Nozzle

CC series flat fan nozzle Series

Industrial Spray Nozzles

Small capacity (CC)
1/8 “-1/4”
NPT or BSPT(male)

Industrial Spray Nozzles

Medium capacity (CC-N)
118″‘-3/4″
NPT or BSPT(male)

Industrial Spray Nozzles

Large capacity (CC-M)
1″-2″
NPT or BSPT(male)

Industrial Spray Nozzles

With strainer (CC-L)
1/8″-1/4″
NPT or BSPT(male)

Design features

CC flat fan spray nozzles feature a high impact solid stream or a flat fan spray pattern with the spray angles between 0n-110°.

They produce a uniform distribution of small to medium sized drops. Properly aligned, the specially tapered spray edges make a evenly coverage.

CC and CC-L series nozzles have external piping thread connector and their flow rate are lower than 3.91/min at 3 bar. Inner strainer is available for CC-L Series nozzle with male connector only.

Standard flow rates of CC-N and CC-M Series are 3.9 Umin or larger at 3 bar.All have external piping thread connetor.

Industrial Spray Nozzles

Common application

  • Chemical cleaning
  • Product washing /rinsing
  • Pressure cleaning
  • cooling and quenching
  • Fire suppression prevention
  • Fire fighting
  • Net blanket low pressure cleaning
  • Spray coating
  • Roller and scraper ordering

Fan ceramic core

Industrial Spray Nozzles

Fan tungalloy

Industrial Spray Nozzles

stabilizer for reducing turbulence

Industrial Spray Nozzles
Industrial Spray Nozzles

stabilizer type

stabilizer for reducing turbulence numberInlet Conn. NPT or BSPTNozzle Inlet Conn. NPT or BSPT(in)H i gh(mm)Net weight (kg)
CY21370-1/8×1/81/81/8190.007
CY21370-1/4×1/41/41/4240.01
CY21370-3/8×3/83/83/8270,03
CY21370-1/8×1/81/21/2320.05
CY21370-1/2×1/23/43/4380.10
CY21370-1×111460.18
CY21370-1114×11/411i411,4570.33

Design feature

stabilizers installed in the heads of flat fan spray nozzle increase the spray distance and the durative power. When spray nozzles are installed on T-shape pipe, branching pipe or bend pipe and the fluid swerve into the nozzle, turbulance occurs,which diffuses the flow. The stabilizer minimize the diffusion and concentrate the flow through a thinner and stabler way, offering a better performance in distance and durative power.

Performance data

Spray ancle (3 bar)Capacity sizeNozzle Type /Inlet Conn. NPTEquivalent spray orifice (mm) Capacity (Llmin)Spray angle
CCCC LCC NCC-M
1/81/41/81/41/81/43/81/23/411/1/420.3 bar1 bar2 bar3 bar4 bar5 bar6 bar7 bar10 bar20 bar35 bar1.5 bar3 bar6 bar14 bar
1 1011001        O. 66O   20.230. 320. 390. 46O. 51O.560. 600. 721. 01. 3941  I 0121124
110015        0 79O. 190.340.480.59O. 680 760.84O.901. 11  52 097110121124
11002        0. 91O. 250.460, 640, 790. 911.01 11. 21.42.02. 79811012012.3
1 1 0 0 3        1.10.370.680.971.21.41.51.7I.82.23.14.099110120123
1 1004 •        1.30.500.911.31. 61, 82.02.22, 42, 94.15.4100′11011    9122
1 1005 •        1.40. 621 11, 62, 02. 32.52. 83. 03. 65.  16. 71 0 0″11 011 a122
1 1006 •        1.6O. 751.41.92 42. 73. I3.33. 64. 36.  18. 1101′110111122
11008        1.81.01.82.63.23, 64,14.54, 85.88,210.8102″110117121
11010          2 01  22 33.23.94.65.15 66.07.210.213.5103″1 1 0117119
1 i 0 1 5         241.93 44.85.96.87.68.49.010.815.320104110117118
11020         2.82.54 66.57.99.110.211.212.114, 42027105110 ‘117118
9.5*950050          0.46  0.3160. 200. 230.250. 280.30O. 360.510.678195′105′1    13′
9 501         0.660.120.230.320. 390.460.510.560. 600. 721,01.381′95′105113
9 501 5          0.79O. 190 340.480.590. 680. 760.840.901. 11.52.08295105′113
9502        0 91,0.250.460.64O. 790. 911.01.  11.21.42.02. 78295105′113
9 503        1  10. 370.680 971. 21. 41.51.71.82. 23. 14.08395104′111
9504        1.30.500 911.31.61.82.02.22.42.94.15.48495103108
9505        1.4O. 621. I1.62.02, 32. 52. 83. 03. 65. 16. 78495′102107
9 506        1.60. 751.41.92.42. 73,13.33. 64. 36. 18.  186″95101106
9508        1.81.01.82_63.23, 64.14.54, 85. 88.210.887′95′100105
9510         2.01.22.33.23. 94. 65. 15.66.07. 210.213.589′95100105
9515         2.41 93.44.85. 96. 87, 68.49.010, 815, 3209095100105
9520          2.82. 54. 66.57. 99. 110. 211.212. 114. 420279095100105
9530         3.63. 76.89.711, 813. 715. 316. 718.     12231409195101105
9540           4 05.09 112.915.818.22022242941549295100′105
9550          4 46.211.416.119.723252830365168939599103
9560            4 87.513. 719. 32427313336436181939599103
9570         5.28.716.0232832363942507194939599103
95100           6 412.52332394651566072102135939599102
95150           ,,      .518.734485968768490108153205939599102
80850050        0 46 O. 11O. 160.20O. 230.250. 28O. 30O. 360.510 6761BO95101
8 0006 7        0 53 0.150. 220.260.310.340. 370.406.480.680.9067809499″
8001        [I      68 0. 230. 320. 390.460.510. 560. 600.721  01.368608992′
80015        0 79 0. 340.480.590.680. 760. 840.90I. 1I.52 068BO8992″
8002        0 910.25O. 460. 64O. 79O. 911.01. 11. 21. 42.02. 769BO8891″
8003        1.10.370.680.971.21.41.51.71.82.23.   14.070′80`8 7 –90″
8 004       1.30.500.911.3I. 61.82.02, 22. 42. 94.15.471808689′
8 005        1.40.621.11.62.02.32.52.83.03.65.I6.771BO8689”
8006        1.6O. 751.41. 92. 42. 73. I3.33. 64, 36.  18. 172 ‘808588″
8 008           1  81.01.82. 63.  23. 64.     I4. 54. 85, 88. 210.872′80′8487a
8010        2.01  22. 33. 23. 94. 95. 15 66.07. 210.213.573BO8487″
8015         2 4I. 93. 44. 85. 96.  87. 68 49. 010. 815. 32074BO8386 ‘
8020        2 82. 54. 66. 57. 99.  110. 211.212   114.4202774808386
8030        3.63 76.89.711.813.715.316.718.  I22314074808386″
8040        4 05.09.  112 915.818.220222429415474808386″
8050         4 46. 211.    418   I19. 72325283036516874 –BO8385
8060         4.87 513.719.3242731333643618175808385′
8070         5 28.716.023283236394250719475′80′8386″
80100          6 412.52332394651566072102135758083′86′
80150          7 518.7344859687684901081532057380`B486″
80200          8 725366479911021121211442052707480′82′85′
8 04 00            12.1509112915818220522524029041054078′80°8183
73730077        0 56 0. 180. 250. 300. 350.390.430. 460. 550. 781.053′73′8692
730154        0 810. 190.350. 500. 610. 700. 780.860. 93I. 11. 62. 155″73″8488 ‘
730231          I 00. 290.530. 740. 911,  11.21.31,41, 72.43. 156″73″83”’87’
730308         1.    I0.380.700.991.21, 41.61.71.92.23.     14.25873′8286
7 304 6 2          1.40 581 11. 51. 82.  12. 42 62. 83. 34. 76.26073′8084
730770          1.80 981. 82. 53. 03. 53 94 34. 65, 57. B10.464″73′7782
65*650 017          0.28  0. 050. 060. 070.080. 090. 100. 120. 170.2344″65″7786 -.
650033          0.38  O. ttO. 13O. 150.170.180. 200. 240.340.4447″65″7683
650067        0.53 0. 150.220. 260. 310.340.370. 400. 480. 680.9050 ‘65′7581
6501        0.66 0.230. 320, 390, 460.510. 560. 600, 721.01.351 ‘65″7480
65015        0. 79 0. 340. 480. 590. 680. 760. 840. 90I. 11.52.05165″7480
6502        0.910. 250 460. 640. 790. 911.01.1I. 21. 42.02. 752657379
65025          1.00. 310.570 810. 991.   11.31. 41. 51. 82.53. 452657379
6503          1.10.370.680.971.21.41.51.71.82.23.14.05365”7278
6504        1. 30. 500.911. 31. 61. 82.02. 22. 42. 94.  15.4 5365″7276
6505        1.40.621.   11   62. 02. 32.52. 83. 03. 65.     I6 753″65*72′76
6506        1.60.751.41.92.42.73.I3.33.64.36.I8.I5465″7275
6508        1.8I. 01  82. 63. 23. 64. 14.54. 85. 88.210.855″65′7174
6510         2.01.     22.33. 23. 94. 65. 15. 66. 07, 210.213.556″65″7174
6515           2.41.93.44.85.96.87.68.49.010.815.3205665°7073
6520         2.82.54.66.57.99.  110. 211.212. 114.420275765′7073
6530          3.63.76.89.711.813. 715.316.718.12231405865″6972 ‘
6540         4.05.09 112.915.818. 22022242941545965″6872 ‘
6550        4.46.211.416.119.72325283036516860 ‘65°68′71′
6560         4.87, 513.719.3242731333643618160 ‘65″6871 ‘
6570         5.28.716.023283236394250719460′65″68″71′
65100          6.412.5233239465156607210213558′65″69′70′
65150           7.518.73448596876849010815320559″65″68″70″
65200          8.7254664799110211212114420527060′.65″67′69′
505001        0.66 0 230 320.390 460 510.560.600.721.01.337°50°5965
5002        0.91 0 160 640.790.911 01.11.21.42.02.739°50°57°63°
5003        1.10.370.680.971.21.41.51.71.82.23.14.040505662
5004        1.30.500.911.31.61.82. 02. 22. 42. 94.  15.442′50°5661
5005        l.40.621.11.62.02.32.52.83.03.65.16.744′50′5661′
5006        I.60.75I.41.92.42.73.13.33.64.36. 18. 145′50′5660″
5008       1.81.01.82 63.23.64.14.54.85.88.210.84550′5560
5010    2, 0I.22.33 23. 94.65.15.66.07.210.213. 545 –50`5559
5015         2.41.93.44.85.96.87.68.49.010.815.32045505559
5020        2.82 54.66.57.99 110.211.212.114 4202745505559
5030        3.63.76.89.711.813.715.316.718   122314045505559
5040        4.05.09.     113.915.8_18.220222429415446505459
5050        4.46.211.416.119.72325283036516846505459
5060        4.87.513.719.324273,333643618146°50′5459′
5070        5. 28. 716.023283236394250719446′50′5459′
50100        6.412.5233239465156607210213544′50′5254
50120        6.715.0273947556167728612216244505355
50150        7.518, 73448596676849010815320545′50′5255
50200        8.7254664799110211212114420527046″50′5255
50400           12.7509112915818220522524029041054046505255
50 5 0 0         13. 16211416119723025528030036051068049′50′5154
50 58 0          13.97213218723026529532535042060078049′50°51 
5 0 7 5 0         15.994171240295340385420455540770101049′50′51 
5 0 1 0 00          18, 31252303253954555105606107201020135049′50°51 
501500        22.618734048560069077084091010801530202049′50′5152
502000          26.225046065079091010201120121014402040270049′50°51′52
404001        0. 66  0 320. 39O. 460 510. 56O. 60O. 721, 01  326405259
40015        0. 79  0. 480. 590.680. 76O. 840. 901.     11.52. 02 7405259
4002        0.91 0.460.640.790.911.01.11.21.42.02.729405156
4003        1.1 0.680.971.21.41.51.7 1.82.23.14.0304050 
4004          0.911.31.61.82.02.22.42.94.15.430405056
4005       I   4 1.11.62.02.32.52.  :3.03.65.     16.731′404955
4006        1.6 1 41.92.42.73.  13 33.64.36.  18.  131404955
4008        1.81.01 82.63.23.64.14.54.85.88.2aa31404753
4010         2. 01.22. 33. 23. 94, 65.  15.   .6. 07, 210. 213. 532′40 ‘4546
4015         2.41.93.44.85.96.87.68. 49,010.815.32032′40′4548
4020        2.82.54.66.57.99.110.211.212      114.4202732″404548′
4030         3. 63. 76. 89. 711. 813. 715.3·       718. 1223140334 0 –4548′
4040         4.05.09.I12.915.818.2202224294154344 0 –4548′
4050          4.46.211.416.119.72325283036516835°40°45′48°
4060         4. 87. 513. 719. 3242731333643618135°40′45′48′
4070         5.28.716.023283236394250719435°40′45′48′
40100          6.412.5233239465156607210213534′40 –4 3 ‘4 6
40150          7.518.734485968768490108153205 404344
4 0 2 00           8 7254664799110211212114420527036404244
252501        0. 66  0. 320. 390. 46O. 51O. 560. 600. 72I. 01. 3I 425 –3442
2502        0. 91 0 460.640, 79O. 911 01.  11.21.42.02. 71525′3340
2503       1.         1 0.680.971.21,41.51.71.82.23,14.015″25°3340
2504       1.3 0 911.31.61.82.02.22 42.94 15.416″25′3239
2505        1.4 1.1162.02.32.52 83 03 65.16 116253239
2506        1.6 1.41.92.42. 73.13.33.64.36. 18. 117′25′31 ‘3 8 ‘
2508        I.8 1 82.63.23.64.14.54.85.88.210.817′25′3138′
2510     2.0 2 33.23.94.65.     15.66.07.210.213.518′25′3137′
2515         2.4 3 44.85.96.81.68.49.010.815.3201825313 7 –
2520        2. 82. 54 66.57, 99.110.211.212. I14.420271925′3137
2530         3. 63. 76 89.711.813. 715, 316.718.122314020′25′3036
2540          4.05.09.112.915.818.220222429415421′25°2935
2550         4.46.211.416.119.72325283036516821′25′2935
2560         4.87.513.719.3242731333643618122′25′2935
2570         5.28.716.023283236394250719422′25°2935
25100          6.412.5233239465156607210213523′25′28 .32′
25150          7.518.73448596876849010815320524′25′28′30
25200            8.7254664799110211212114420527024′25′26°29″
25500            13. 16211416119723025528030036051068024°25°26°29°
25750            15.99417124029534038542045554077010102425°2628
251000            18.7125230325395455510560610720102013502425′2628
1 51501        0.66  0.320.390.460.510.560.600.721.01.3 15′2428
1502          0.91  0.640.790.91I.01.11.21.42.02.7 1 5 .2227
1503        I.1  0.971.21.41.51.71.82.23.14.0 152227′
1504       1,3  1.31.61.82.02.22.42.94.15.4‘7°15′2126
1505        1.4  1.62.02.32.52.83.03.65.16.77°15°2126
1506        1. 6 1.41. 92.42.73.  13.33. 64, 36.     18.     I8°15′2126
1508        1.8 1.82.63.23.64. 14.54.85.88.210.89°15°20′25
1510      2.   0 2. 33.23.  94. 65.  15. 66, 07. 210.213, 510′15′1 924
1515         2. 4 3.44.85. 96. 87.  68.49. 010.815.32010°15°1924
1520         2. 8 4 66. 57. 99. 110.211       212.114.4202710′151923
1530         3. 6 6.89.711.813.715.316.718.122314010′15′1 921
1540        4.0 9 I12.915.818.220222429415410′151 821
1550       4, 4 11.416.119.7232528303651681 1′15′1 821
rotating tank cleaning nozzle

V

1/8 inch-3/4inch NPT or BSPT(male)

Industrial Spray Nozzles

V Common Narrow Spray Nozzle design features

V series spray nozzle features a very high impact flat fan spray pattern with narrow spray angles.They produce a uniform spray distribution of medium-sized drops.

Its V spray pattern has sharply defined edges,

It is one-piece design with male screw thread.A large, unobstructed flow passage minimizes clogging problems.

All V spray nozzles offer a precision-designed deflector surface which produces a unifornri,high impact spray pattern.

common application

  • Crushed stone gravel washing
  • High impact washing
  • Oil Removing
  • Fruit and vegetable washing
  • Paper machine deckle spraying
Industrial Spray Nozzles

V Common Narrow Spray Nozzle design features

Industrial Spray Nozzles

Performance data

Spray angle (3 bar) Noule Inlet Conn. NPT or BSPT Capacity Size Rated Orifice Dia. (mm) Capacity (L/min) Spray angle Dimension net weight (kg)
1/8 1/4 3/8 1/2 3/4 1 bar 2 bar 3 bar 4 bar 5 bar 6 bar 7 bar 10 bar 1 bar 3 bar 7 bar A (mm) B Deflection angle C Square bar size (mm)
50 5010 2.0 2. 3 3. 2 3.9 4.6 5.1 5.6  6.0 7, 2 34′ 50″ 60’r 31 60″ 15.9 O. 03
5025 2.8 5.7 8. 1 9.9 11.4 12.7 14.0 15.1 18, 0 42′ 50″ 549′ 41.5 42′ 91,  1 O. 09
5040 3.6 9.1 12.9 15.8 18.2 20 22 24 29 39′ 50′ 60′ 47 45′ 19,  1 O. 09
5060 4.8 13.7 19.3 24 27 31 33 36 43 42′ 50′ 53′ 55 37″ 25. 4 0, 14
50100 6.0 23 32 39 46 51 56 60 72 43″ 50 55′ 72 40′ 31, 8 0. 33
50125 6, 7 28 40 49 57 64 70 75 90 38′ 50′” 59″ 72 38° 31, 6 0. 31
50160 7.5 36 52 63 73 82 89 96 115 44′. 50′ 55′ 72 37 31.8 0.31
50200 8.3 46 64 79 91 102 112 121 144 46′ 50′ 53′ 72 32″ 31.8 0, 31
40 4040 3. 6 9,   1 12, 9 15.8 18.2 20 22 24 29 31′ 40 50 60. 5 35 22. 2 0. 14
4050 4.0 11.4 16.1 19.7 23 25 28 30 36 31  ‘ 40″ 49′  63.5 33′ 25.4 O. 20
4060 4.4 13.7 19.3 24 27 31 33 36 43 32′ 40″ 49′ 72 33″ 25.4 O. 23
4070 5.2 16.0 23 28 32 36 39 42 50 32′ 40′ 49″ 75, 5 29″ 25. 4 0.26
4080 5.2 18.2 26 32 36 41 45 48 58 32′ 40′ 48″ 77 26′ 25.4 0.26
4090 5. 6 21 29 36 41 46 50 54 65 34′ 40°’ 44 ‘ 77 28″ 25.4 0. 23
40100 6.0 23 32 39 46 51 56 60 72 35′ 40′ 44′ 86.5 28′ 25.4 0.26
35 3504 1.2 0.91 1.3 1.6 1.8 2.0 2.2 2.4 2.9 20′ 35″ 41′ 23 40° 11. 1 0. 01
3510 2.0 2.3 3.2 3.9 4.6 5.1 5.6 6.0 7.2 18″ 35′ 39′ 36.5 36″ 15.9 0.06
3520 2.8 4.6 6.4 7.9 9.1 10.2 11.2 12.1 14,4 24′ 35′ 40″ 42 30′ 19.1 O. 06
3525 2.8 5.7 8.1 9.9 11.4 12.7 14.0 15.1 18.0 24′ 35′ 39″ 49 28″ 19.1 0.09
3530 3.2 6.8 9.7 11.8 13.7 15.3 16.7 18.1 22 26′ 35″ 41′ 52.5 28′ 19. 1 O. 09
3540 3.6 9.1 12.9 15.8 18.2 20 22 24 29 28′ 35′ 38 58 26″ 22. 2 O.   11
3550 4.0 11.4 16.1 19.7 23 25 28 30 36 31′ 35′ 38′ 63.5 23″ 22.2 0. 14
3560 4.4 13.7 19.3 24 27 31 33 36 43 29′ 35′ 39′ 73 27″ 25.4 O. 23
3580 5.2 18.2 26 32 36 41 45 48 58 26″ 35″ 40′ 81 24′ 25. 4 0. 26
35100 6.0 23 32 39 46 51 56 60 72 26 35′ 40 89 19 25. 4 0. 26
35160 7.5 36 52 63 73 82 89 96 115 26′ 35′ 40 114 23′ 31. 8 0, 57
35200 8.3 46 64 79 91 102 112 121 144 25″ 35′ 40′ 122 22′ 31. 8 O. 57
25 2540 3. 6 9.  1 12.9 15.8 18.2 20 22 24 29 15″ 25″ 34″ 65 25″ 19.  1 O.   11
15″ 1510 2.0 2.3 3.2 3.9 4.6 5.1 5.6 6.0 7.2 1 5 ‘ 23′ 47.5 22 15.9 0.06
1520 2. 8 4, 6 6.4 7. 9 9.1 10.2 11.2 12.1 14.4 1 5′ 19′ 54 19′ 15. 9 O. 06
1530 3.2 6.8 9.7 11.8 13.7 15.3 16.7 18.1 22 6 15′ 24″ 72 25 19.1 O.11
1540 3.6 9.1 12.9 15.8 18.2 20 22 24 29 8″ 15′ 21′ 92 18′ 22.2 O. 23
1550 4.4 11.4 16.1 19.7 23 25 28 30 36 9′ 15′ 20 90.5 15 22.2 0.17
1560 5.2 13.7 19.3 24 27 31 33 36 43 10′ 15′ 19 125 14 25.4 0. 34
1580 6.0 18.2 26 32 36 41 45 48 58 11′ 15″ 18″ 130 14′ 25.4 0. 34
15100 7.5 23 32 39 46 51 56 60 72 11′ 15′ 18′ 137 14″ 25.4 0. 40
15200 8.3 46 64 79 91 102 112 121 144 12′ 15′ 18′ 191 14′ 31.8 0.91

Common Wide-angle Spray Nozzle

W

1/8″-1″NPT or BSPT(male)

Nozzle Dimension

Nozzle type
Nozzle Dimension Hexagona i (mm) Nozzle length (mm)
1/8 14.3 31
1/4 14.3 34

Common application

  • Clarify board of spraying air
  • Cooling conveyer belt
  • Film development
  • Fire proofing
  • Water curtain
Industrial Spray Nozzles
Industrial Spray Nozzles

Dimension and weight

Industrial Spray Nozzles

Performance data

Air and steam

Capacity SizeRated Orifice Dia. (mm)Air capcity (L/ m)Steam capcity (L/ min)The coverage of 150mm
0.7bar1.5bar3bar3.5bar0.7bar1.5bar3bar3.5bar0.7bar1.5bar
0.500.614.56.410.511.60.160.230.370.4151127
0.750.716.29.114.716.70.230.330.530.6664 140
10.849.613.722250.340.490.800.9076152
1.51.0415.32236400.540.781.31.589165
21.1719.32845510.681.01.61.8102190
2.51.32273760710.951.32.12.5102190
31.45314777851.11.72.73.0127203
41.654057851081.42.03.13.9127228
51.8554761241391.92.74.55.0152267
7.52.31791171892102.94.26.87.6152 267
102.641101592552903.95.79.210.4178279
153.281812604204756.59.315.017.1178305
203.762253255205908.011.618.821216368
304.5732046576085011.616.82730216394

Liquid

Nozzle Inlet Conn. NPT or BSPT(male) Capacity Size Rated Orifice Dia. (mm) Capacity (L/min) Sprayangle
1/8 1/4 3/8 1/2 3/4 1 0.2 bar 0.3 bar 0.5 bar 0.7 bar 1 bar 1.5 bar 2 bar 3 bar 4 bar 0.5 bar 1.5 bar 4 bar
0.25 O.41 0.11 0,14 0.16 O.20 O.23 83 117
0.50 0.61 i 0.23 0.28 0.32 0.39 0.46 89″ 122′
0.75 0.71 i 0.29 0.34 0.42 0.48 O.59 0, 68 105 ‘ 125′
1 0.84 0.38 0.46 0.56 0.64 0.79 0.91 109′ 128″
1.5 1.0 0.48 0.57 0.68 0.84 0.97 1,2 1.4 73′ 108′ 125″
2 1.2 0.64 0.76 0,91 1,1 1.3 1.6 1.8 83′ 113″ 129″
2. 5 1.3 0.62 0.81 0.95 1.1 1.4 1.6 2,0 2,3 98′ 122′ 133′
3 1.4 10.75 0.97 1.1 1,4 1,7 1.9 2.4 2.7 86 1  12′ 126
4 1.      7 1.0 1.3 1.5 1.8 2.2 2.G 3.2 3,6 97 123′ 132
5 1.9 1.0 1.2 1.6 1.9 2,3 2.8 3.2 3,9 4.6 114 128 ‘ 142′
7.5 2.3 1.5 1.9 2.4 2.9 3.4 4.2 4.8 5.9 6.8 101′ 119′ 134′
10 2.6 2.0 2.5 3.2 3.8 4.6 5.6 6.4 7.9 9.1 115′ 133′ 145′
12 2.9 2.4 3.0 3.9 4.6 5.5 6.7 7.7 9.5 10.9 128′ 139″ 153”
15 3.3 3.1 3.7 4.8 5.7 6.8 8.4 9.7 11.8 13.7 98′ 113 123′
18 3.6 3.7 4.5 5.8 6.9 8.2 10.0 11.6 14.2 16.4 106′ 120′ 131′
20 3.8 4.1 5.0 6.4 7.6 9.1 11.2 12.9 15.8 18.2 110′ 122′ 133′
22 4.0 4.5 5.5 7.1 8.4 10.0 12.3 14.2 17.4 20 113′ 125′ 136”
24 4.1 4.9 6.0 7.7 9.2 10.9 13.4 15.5 18.9 22 115′ 131″ 144′
27 4.4 5.5 6.7 8.7 10.3 12.3 15.1 17.4 21 25 119° 135″ 148′
30 4.6 6. 1 7.5 9.7 11.4 13.7 16.7 19.3 24 27 100′ 110′ 121′
35 5.0 7.1 8.7 11.3 13.3 16.0 19.5 23 28 32 105′ 118″ 128′
40 5.3 8.2 10.0 12.9 15.3 18.2 22 26 32 36 111′ 126′ 136″
45 5.6 9.2 11.2 14.5 17.2 21 25 29 36 41 115′ 130″ 140′
50 6.0 10.2 12.5 16.1 19.1 23 28 32 39 46 117′ 131′ 140′
60 6.5 12.2 15.0 19.3 23 27 33 39 47 55 120′ 134″ 142`
._ 70 7.1 14.3 17.5 23 27 32 39 45 55 64 123′ 137″ 146′
80 7.5 16.3 20 26 31 36 45 52 63 73 127′ 138″ 149′
90 8.0 18.3 22 29 34 41 50 58 71 82 120′ 133 140′
100 8.4 20 25 32 38 46 56 64 79 91 123″ 135′ 145`
110 8.8 22 27 35 42 50 61 71 87 100 125′ 138″ 148`
120 9.3 24 30 39 46 55 67 77 95 109 129` 143″ 150″
140 10.3 29 35 45 53 64 78 90 111 128 118′ 127″ 135′
160 11.1 33 40 52 61 73 89 103 126 146 121″ 130″ 137″
180 11.5 37 45 58 69 82 100 116 142 164 124′ 133″ 139′
210 12.3 43 52 68 80 96 117 135 166 191 128′ 139′ 145′
300 14.7 61 75 97 114 137 167 193 235 275 110′ 128′ 135′
450 17-9 92 112 145 172 205 250 290 355 410 1I8′ 132′ 138″
Industrial Spray Nozzles

SJV Three piece Full Cone Flat Fan Spray Nozzle

Industrial Spray Nozzles
SJVC spray tip
Industrial Spray Nozzles

SJVW
Wide angle spray tip

Industrial Spray Nozzles

SJVB
Full cone spray tip

Industrial Spray Nozzles

SJVA
Hollow cone spray tip

Industrial Spray Nozzles

MG
Tip retainer

Industrial Spray Nozzles

GLO
Screen strainer

Industrial Spray Nozzles

SJVE
MALE body

Industrial Spray Nozzles

SJVL
Female body

Design features

High pressure, High impact solid stream or flat fan spray pattern with spray angles of 010 110°.

Spray pattern with uniform distribution, Samll-to medium sized drops. Specially uniform distridution with with spray area is ideal for use in manifold and header applications.

All SJVC nozzle are finish machining. It can pro­vide the accurate flow and spray angle.

SJVW provide wide angle flat fan atomization, SJVB provide standard solid cone atomization and SJVA provide taper atomization .

Industrial Spray Nozzles

common application

  • Low pressure washing
  • Chemotherapy coating
  • Metal cleaning and precessing
  • Spray coating
  • Degreasing and rinsing
  • Parts washing !cleaning
  • Spray cooling
  • Pressure cleaning
  • Sand,coal ,gravel washing

Nozzle body

Nozzl and gasket ‘s material consist of brass ,303SS and 316SS.The inlet connection thread (NPT or BSPT )size is 1/8″ , 1/4″ , 3/8″ and W’ (Male or female )

Inlet Conn. NPT or BSPTNozzle parts order NO.Material
( female )( male )
1/81/80J1 /80JJBrass
1 /80J-SS1 /8-QJJ-SS5$
1/41/40J1 /40JJBrass
1/40J-SS1 /40JJ-SSss
3/83/80J3/80JJBrass
3/80J-SS3/8QJJ-SSss
1/21/2QJ1 /20JJBrass
1/20J-SS1 /20JJ-SS55

Strainer informatio

The choice for the orifice of the strainer
Equivalent spray orifice Suggested size of stell strainer’s orifice
less than 0.46mm 200
47mm -0.79mm 100
0.8mm or larger 50
Industrial Spray Nozzles

Performance data

Spray angle i 3 bar) Capacity Size Equivalent spray orifice(mm) Capacity (Limin) Spray angle
0.3bar lbar 2bar 3bar 4bar 5bar 6bar 7bar 10bar 20bar 35bar 1.5bar 3bar 6bar 14bar
110° 11001 0.66 0.12 0.23 0.32 0.39 0.46 0.51 0.56 0.60 0.72 1.0 1.3 94° 110° 121° 124′
110015 0.79 O.19 0.34 0.48 0.59 0.68 0.76 0.84 0.90 1.1 1,5 2,0 97° 110° 121° 124°
11002 0.91 0.25 0.46 0.64 0.79 0.91 1.0 1.1 1.2 1.4 2.0 2.7 98° 110° 120° 123°
11003 1.1 0.37 0.68 O.97 1.2 1.4 1.5 1.7 1.8 2,2 3.1 4,0 99° 110° 120° 123°
11004 1.3 0.50 0.91 1.3 1.6 1.8 2.0 2.2 2.4 2.9 4.1 5.4 100″ 110′ 119° 122′
11005 1.4 O.62 1.1 1,6 2.0 2.3 2.5 2.8 3.0 3.6 5.1 6.7 100′ 110° 118° 122′
11006 1.6 0.75 1.4 1,9 2.4 2.7 3.1 3.3 3.6 4.3 6,1 8,1 101° 110′ 117″ 122′
11008 1.8 1.0 1.8 2.6 3.2 3.6 4.1 4.5 4.8 5.8 8.2 10.8 102° 110 117° 121°
11010 2.0 1.2 2.3 3.2 3.9 4.6 5.1 5.6 6.0 7.2 10.2 13.5 103′ 110 117″ 119′
11015 2.4 1.9 3.4 4.8 5.9 6.8 7.6 8.4 9.0 10.8 15.3 20 104″ 110° 117° 118°
11020 2.8 2.5 4.6 6,5 7,9 9.1 10.2 11.2 12.1 14.4 20 27 105′ 110° 117° 118°
11030 3.6 3,7 6.8 9.7 11.8 13.7 15.3 16.7 18.1 22 31 40 105° 110″ 117° 118°
9,5° 80° 65° 50° 45° 25° 15° 01 O.66 0.12 0.23 0.32 O.39 0.46 O.51 0.56 0.60 0.72 1,0 1.3 81° 95″ 105 113°
015 0.79 0.19 0.34 0.48 0.59 0.68 0.76 0.84 0.90 1. 1 1.5 2.0 82° 95° 105° 113°
02 0.91 0.25 0.46 0,64 0,79 0.91 1.0 1.1 1.2 1.4 2.0 2.7 82° 95° 105° 113°
03 1.1 0.37 0.68 O.97 1.2 1.4 1.5 1.7 1.8 2.2 3.1 4.0 83° 95° 104° 111°
04 1.3 0,50 O.91 1,3 1.6 1.8 2.0 2.2 2.4 2,9 4.1 5,4 84° 95° 103° 108°
05 1.4 0.62 1. 1 1,6 2.0 2.3 2.5 2.8 3.0 3.6 5.1 6.7 84° 95° 101° 107°
06 1.6 O.75 1.4 1,9 2,4 2.7 3.1 3.3 3.6 4.3 6.1 8,1 86° 95° 100° 106°
08 1.8 1.0 1.8 2.6 3.2 3.6 4.1 4.5 4.8 5.8 8.2 10.8 87° 95° 100° 105°
10 2.0 1.2 2.3 3.2 3.9 4.6 5.1 5.6 6.0 7.2 10.2 13.5 89° 95° 100° 105°
15 2.4 1.9 3.4 4.8 5.9 6.8 7.6 8.4 9.0 10.8 15.3 20 90° 95° 100° 100°
20 2.8 2,5 4.6 6,5 7.9 9,1 10.2 11.2 12.1 14.4 20 27 90° 95° 95° 105°
30 3.6 3.7 6.8 9.7 11.8 13.7 15.3 16.7 18.1 22 31 40 91° 95° 95° 105°
40 4.0 5.0 9.1 12.9 15.8 18.2 20 22 24 29 41 54 92° 95° 95° 105°
50 4.4 6.2 11.4 16.1 19.7 23 25 28 30 36 51 68 93° 95° 95° 103°
60 4.8 7.5 13.7 19,3 24 27 31 33 36 43 61 81 93° 95° 95° 103°
70 5.2 8.7 16.0 23 28 32 36 39 42 50 71 94 93° 95° 95° 103°
0000090 0.20 0.01 0.02 0.03 0.035 0.04 0.045 0.05 0.06 0.07 0.09 0,12 0° solid stream
000012 0.25 0.02 0.03 0.04 0.05 0.055 0.06 0.067 0.08 0.09 0.12 0.16
000019 0.30 0.02 0.04 0.06 0.08 0.09 0.10 0.11 0.12 0.14 0.19 0.26
000021 0.34 0.03 0.05 0.7 0.08 0.10 0.11 0.12 0,13 0.15 0.21 0.28
000050 0.51 0.06 0.11 0.16 0,20 0.23 0,25 0.28 0.30 036 0.51 0.67
000067 0.58 0.08 0.15 0.22 0.26 0,31 0,34 0.37 0.40 0,48 0,68 0,90
0001 0.71 0.12 0.23 0.32 0.39 0.46 0.51 0.56 0.60 0.72 1.0 1.3
00015 0.84 0.19 0.34 0.48 0.59 0.68 0.76 0.84 0.90 1.1 1.5 2.0
0002 0.99 0.25 0.46 0.64 0.79 0.91 1.0 1.1 1.2 1.4 2.0 2.7
0003 1.2 0.37 0.68 0.97 1.2 1.4 1.5 1.7 1.8 2.2 3.1 4.0
0004 1.4 0.50 0.91 1.3 1.6 1.8 2.0 2.2 2.4 2.9 4.1 5.4
0005 1.5 0.62 1.1 1-6 2.0 2.3 2.5 2.8 3.0 3.6 5.1 6.7
0006 1.7 0.75 1.4 1.9 24 2.7 3.1 3.3 3.6 4.3 6,1 8.1
0008 2. 0 1,0 1.8 26 3.2 3.6 4.1 4.5 4.El 5.8 8.2 10,8
0010 2.2 1.2 2.3 3-2 3.9 4.6 5.1 5.6 6.0 7.2 10.2 13.5
0015 2.7 1.9 2.4 4_8 5.9 6.8 7.6 8.4 9.0 10.8 15.3 20
0020 3.2 2.5 4.6 6.5 7.9 9,1 10.2 11.2 12.1 14.4 20 27
0030 3.6 3.7 6.8 9_7 11.8 13.7 15.3 16.7 18.1 22 31 40
0040 4.0 5.0 9. 1 12.9 15.8 18.2 20 22 24 29 41 54

Wide angle fan cone performace data

Nozzle Inlet Conn. NPT or BSPT(male)Capacity SizeRated Orifice Dia. (mm)Capacity (L/min)Spray angle
1/81/4 0.2bar0.3bar0.5bar0.7bar1 bar1.5bar2bar3bar4bar0.5bar1.5bar4bar
 0.250.41    0.110.140.160.200.23 83′117′
 0.500.61    0.230.280.320.390.46 89′122′
 0.750.71   0.290.340.420.480.590.68 106′125°
 10.84   0.380.460.560.640.790.91 109′128′
 1.51.0  0.480.570.680.840.971.21.473′108′125′
21.2  0.640.760.911.11.31.61.883′113°129′
2.51.3 0.620.810.951.11.41.62.02.398′122°133′
31.4 0.750.971.11.41.71.92.42.786′112′126″
 41.7 1.01.31.51.82.22.63.23.697′123°132′
51.91.01.21.61.92.32.83.23.94.6114128′142″
7.52.31.51.92.42.93.44.24.85.96.8101′119°134′
102.62.02.53.23.84.65.66.77.99.1115′133°145″
122.92.43.03.94.65.56.77.79.510.9128139°153°
153.33.13.74.85.76.88.49.711.813.798′113°123′
183.63.74.55.86.98.210.011.614.216.4106120′131°
203.84.15.06.47.69.111.212.915.818.2110′122′133′
 224.04.55.57.18.410.012.314.217.420113′125°136°
 244.14,96.07,79.210.913.415.518.922115′131°144′
 274.45,56.78.710.312.315.117.42125119′135°148°

SJVA Hollow Cone Spray Nozzle Tip

Design features

SJVA Hollow Cone Spray Nozzle consists of SJV male( or female) body, screen strainer, spray tip and tip retainer. Fine misting effect attained to the relatively low pressure and uniform spray distribution with the hollow cone spray performance, also forming ring spray area. The nozzle body can be reuse with low cost, just need change the nozzle tips.

Industrial Spray Nozzles

Common Angle Type Wide-angle Type
*The nozzle tip should use with SJV body and tip retainer together

SJVA Common Angle Type

  • in the specified pressure{bar)
Capacity Size Groove Width *Depth (mm) Rated Orifice Dia. Capacity (L/h)* Spray Angle (. )*
(mm) 1.5 2 3 4 6 7 10 15 25 1.5 3
.60 single slot 0.30 x 0.25 0.36 2.7 3.4 3.6 4.3 5.3 6.8
1 single slot 0.41 x 0.38 0.51 3.2 3.9 4.6 5.6 6.0 7.2 8.8 11.4 54
1.25 single slot 0.51 x 0.51 0.56 4.0 4.9 5.7 7.0 7.5 9.0 11.0 14.2 59
1.5 single slot 0.61 x 0.51 0.61 4.8 5.9 6.8 8.4 9.0 10.8 13.2 17.1 63
2 single slot 0.71 x 0.61 0.71 5.6 6.4 7.9 9.1 11.2 12.1 14.4 17.7 23 40 68
2.5 single slot 0.76 x0 .74 0.79 7.0 8.1 9.9 11.4 14.0 15.1 18.0 22 28 48 70
3 single slot 0.91 x 0.86 0.86 8.4 9.7 11.8 13.7 16.8 18.1 22 26 34 57 72
4 single slot 1.0 x 0.86 1.0 11.2 12.9 15.8 18.2 22 24 29 35 46 61 73
5 double slot0.131 x 0.81 1.1 14.0 16.1 19.7 23 28 30 36 44 57 63 73
6 double slotl.0 x 0.81 1.2 16.8 19.3 24 27 34 36 43 53 68 65 74
8 double slotl.0 x 0.91 1.4 22 26 32 36 45 48 58 71 91 66 74
10 double slot1.3 x 0.76 1.5 28 32 39 46 56 60 72 88 114 68 75
12 double slot1.3 x 0.86 1.7 34 39 47 55 67 72 86 106 137 69 76
14 double slot 1.4 x 0.86 1.8 39 45 55 64 78 84 101 124 160 70 76
18 double slot1.5 x 0.79 2.0 50 58 71 82 101 109 130 159 205 71 77
22 double slot1.7 x 0.76 2.2 61 71 87 100 123 133 159 194 251 71 78
26 double slot1.7 x 0.76 2.4 73 84 103 119 145 157 187 230 296 72 78
All the spray angle are 80degree. working under 7 bar.

SJVA-W Wide-angle Type

  • in the specified pressure{bar)
Capacity SizeGroove Width ‘Depth (mm)Rated Orifice Dia. (mm)Capacity (L/h)*Spray Angle (. )’
0.711.52234671.536
2Wdouble slot 0.41 x0.380.793.84.65.66.47.99.111.212.1130140136
3Wdouble slot 0.51 x 0.480.995.76.88.49.711.813.716.818.1138140137
4Wdouble slot 0.61 x 0.531.17.69.111.212.915.818.22224140140138
5Wdouble slot 0.71 x 0.691.39.511.414.016.119.7232830140140138
6Wdouble slot 0.81 x 0.661.411.413.716.819.324273436140140138
8Wdouble slot 0.91 x 0.741.615.318.2222632364548140140136
10Wdouble slot 1.0 x 0.761.819.123283239465660140140136
12Wdouble slot 1.1 x 0.742.02327343947556772140140136

SJVA Dimension Drawing

Industrial Spray Nozzles